High Flow Humidifier

Operation Transport and Storage

• Temperature: 18C to 28C (64.4 F to 82.4 ??F) -25C to +70C (-13 ??F to +158 F)
• Humidity: 93%, Non-condensing 93%, Non-condensing
• Atmospheric Pressure: 760 hPa to 1060 hPa 760 hPa to 1060 hPa
• Heated humidification Range: Off, 1 - 5 gear
• Humidifier Output: No less than 33 mg/L, at 37 C target
• Maximum Delivered Gas Temperature: 43C
• Mode of Operation Continuous
• Work Mode HFlow, LFlow, AutoFlow, SmartFlow
• SD Card SD card can record patient data and fault information
• AC Power Consumption 220 V - 240 V ~, 50 Hz / 60 Hz, 2.5 A
• Type of Protection against Electric Shock Class II Equipment
• Degree of Protection against Electric Shock
• Type BF Applied Part
• Degree of Protection against Ingress of Water IP22
• Sound Power Level < 28 dB (A), When the working mode of the device is HFlow, and the output flow is 25 L/min
• Maximum oxygen input flow 80 L/min
• FiO2 Range: 21% -100 %, binning interval 1%
• Margin of Error: +(5% + 5% set value)
• FiO2 Display Accuracy +(5% + 5% set value)
• Temp Range: 25C -45C
• Temp Display Accuracy +2C
• Flow Range: 2 L/min -80 L/min
• Margin of Error: +(2 L + 10% set value)
• Flow Display Accuracy +(2 L + 10% set value)
• sPEEP Range: 0 ~ 20 hPa
• Margin of Error: +(1 hPa + 20% set value)
• Humidity Compensation Range: -3-3,-3-2-1 0 -1-2-3, the higher the range, the higher the humidification output
• Flow Step Interval Range: 15 L/min -80 L/min
• Tube Length: 1.8 m
• Margin of Error: +10%
• The connection should not fall off under the 45 N tension.
• Specification of Patient Connector 18 mm cone joint